- Electric fire pump controllers
- Pressure limiting fire pump controllers
- Diesel engine fire pump controllers
- Medium voltage fire pump controller
- Limited service pump controllers
- Residential Fire Pump Controller
- Jockey Pump Controllers
- Alarm and lockout panels
- Non-listed fire pump controller
- Industrial pump controllers
- Legacy Products
- Information requests, comments or suggestions
Electric fire pump controllers
GPx Series
Full Service Electric Fire Pump Controllers with or without Automatic Power Transfert Switch
> Model GPA - Across-the-line |
Dimensions & Submittal Package | |
> Model GPP - Partwinding |
Dimensions & Submittal Package | |
> Model GPR - Autotransformer |
Dimensions & Submittal Package | |
> Model GPS - Soft Start Soft Stop |
Dimensions & Submittal Package | |
> Model GPW - Wye-Delta Closed |
Dimensions & Submittal Package | |
> Model GPY - Wye-Delta Open |
Dimensions & Submittal Package | |
Standard, Listings, Approvals and Certifications
• Built to NFPA 20 (latest edition)
• Underwriters Laboratory (UL)
• UL218 - Fire pump controllers
• UL 1008 – Automatic power transfer switches for fire pump controllers
• CSA C22.2 No. 14 Industrial Control Equipment
• FM Global - Class 1321/1323
• New York City - Accepted for use in the City of New York by the Department of Buildings
• Optional: CE Mark - Various EN, IEC & CEE directives and standards
Enclosure Protection Rating
Standard: NEMA 2 Assembly
Optional:
| • NEMA 12 • NEMA 3 • NEMA 3R • NEMA 4 • NEMA 4X-304 sst painted • NEMA 4X-304 sst brushed finish • NEMA 4X-316 sst painted • NEMA 4X-316 sst brushed finish |
• IP54 • IP55 • IP65 • IP66 |
Accessories
• Bottom entry gland plate
• Lifting Lugs
• Keylock handle
Paint Specifications
• Red RAL3002
• Powder coating
• Glossy textured finish
ViZi Touch Operator Interface
• 4.2” color touch screen (HMI technology)
• Embedded microcomputer with software PLC logic
• Expandable storage
• Multi-language
• Upgradable software
Standard Features
| • Surge Suppression • Disconnecting means o Single operator for both isolating switch and circuit breaker o Door interlocked in the ON position • Suitable as service entrance equipment • Emergency start handle • Locked rotor protector • Readings o Voltage and amperage display o Cut-in, cut-out and continuous system pressure |
• Visual indications: o Standard Conditions o Alarm Conditions o Color coded for criticalness • Remote Alarms (SPDT-8A-250V.AC) o Power available o Phase reversal o Motor run o Common pump room alarm o Common Motor trouble |
Operation
| • Automatic start on pressure drop • Start and stop pushbuttons • Run test pushbutton • Remote start / deluge valve start provision • Timers o Minimum run timer o Sequential start timer • Pressure or non-pressure actuated |
• Automatic or non-automatic Pressure Sensing • Pressure transducer and run test solenoid valve assembly for fresh water application externally mounted with protective cover Pressure and Event Recorder • Pressure readings and event recording with date stamp • Stored in memory for lifetime of controller • Data viewable on operator interface display screen • Downloadable by USB port to external memory device |
Audible Alarm
• 4” alarm bell - 85 dB at 10ft. (3m)
Automatic Power Transfer Switch - Model GPU
Standard Features
• Surge suppression
• Disconnecting means
o Single operator for both isolating switch and circuit breaker
o Door interlocked in the ON position
• Locked rotor protector
• Visual indications
o Alternate (emergency) isolating switch in the OFF position
o Alternate (emergency) voltage phase to phase
o Transfer switch in normal position
o Transfer switch in Alternate (emergency) position
• Transfer switch test pushbutton
• Bypass for re-transfer and generator shutdown
• Electrically operated and mechanically held in the normal or alternate position
• Provision for manual operation
• Time Delays
o Momentary normal power outage override (factory set at 3 sec - field adjustable 1 to 3 sec)
o Alternate (emergency) power available delay (factory set at 3 sec - field adjustable 1 to 3 sec)
o Transfer trouble delay (factory set at 20 sec - field adjustable 1 to 60 sec) o Retransfer to normal (factory set at 5 min - field adjustable 1 to 20 min)
o Generator cooldown (factory set at 5 min - field adjustable 1 to 20 min)
• Voltage sensing
o Transfer to alternate (normal power dropout) 85% of nominal - field adjustable 0 to 100%
o Phase reversal transfer to alternate o Retransfer to normal (normal power pickup) 90% of nominal - field adjustable 0 to 100%
• Remote alarm contacts
• Generator start connection
Audible Alarm (AIS open)
• 4” alarm bell - 85 dB at 10ft. (3m)
How to order:
| GPx- | V/ | HP/ | Ph/ | Hz | + options |
|---|---|---|---|---|---|
| GPA- | 208/ | 30/ | 3/ | 60 | + options |
| GPx SPECIFICATIONS - WITHOUT TRANSFER SWITCH | |||||
|---|---|---|---|---|---|
| Word File | PDF File | ||||
| English | Français | Español | English | French | Español |
| GPA-E | GPA-F | GPA-E | GPA-F | ||
| GPP-E | GPP-F | GPP-E | GPP-F | ||
| GPR-E | GPR-F | GPR-E | GPR-F | ||
| GPS-E | GPS-F | GPS-E | GPS-F | ||
| GPW-E | GPW-F | GPW-E | GPW-F | ||
| GPY-E | GPY-F | GPY-E | GPY-F | ||
| GPx + GPU SPECIFICATIONS - WITH TRANSFER SWITCH | |||||
|---|---|---|---|---|---|
| Word File | PDF File | ||||
| English | Français | Español | English | Français | Español |
| GPA + GPU-E | GPA + GPU-F | GPA + GPU-E | GPA + GPU-F | ||
| GPP + GPU-E | GPP + GPU-F | GPP + GPU-E | GPP + GPU-F | ||
| GPR + GPU-E | GPR + GPR-F | GPR + GPU-E | GPR + GPU-F | ||
| GPS + GPU-E | GPS + GPU-F | GPS + GPU-E | GPS + GPU-F | ||
| GPW + GPU-E | GPW + GPU-F | GPW + GPU-E | GPW + GPU-F | ||
| GPY + GPU-E | GPY + GPU-F | GPY + GPU-E | GPW +GPU-F | ||