Additive (Foam) Pump Controllers are typically designed for use in buildings where flammable or combustible liquids are present such as aircraft hangers, petro-chemical and hazardous waste facilities.

Model GPL – Full Voltage Across the Line Start
Transfer switch available.

Choose one of the following configurations:

• A8 – Additive (Foam) pump controller / non pressure actuated without pressure transducer and run test solenoid valve
• A8A – Additive (Foam) pump controller with pressure transducer and run test solenoid valve

Add any of the following options if required:

• D40 – Dump valve circuitry, 24VDC Max2A
• Cx79 – Low foam additive level complete with visual indication and alarm contact (DPDT)
• Cx081- Provision for proof pressure switch for low additive pressure complete with visual indication and alarm contact. (Proof pressure switch provided by others.)

• Designed for use with electric motor drivenfire pumps.
• Manufactured in accordance with the NFPA 20 standard and UL listed
• ViZiTouch 7 inch ColorTouch Screen Operator Interface (HMI technology)

Limitations

• Across the line starting only
• Horsepower rating of maximum 30hp
• Can only be installed where acceptable by the authority having jurisdiction
• Not accepted in FM insured property
• Limitations
  • Across the line starting only
  • Horsepower rating of maximum 30hp
  • Can only be installed where acceptable by the authority having jurisdiction
  • Not accepted in FM insured property

• Surge Suppression
• Disconnecting means
  • Single operator for circuit breaker
  • Door interlocked in the ON position
• Suitable as service entrance equipment
• Emergency start handle
• Readings
  • Voltage and amperage display
  • Cut-in, cut-out and continuous system pressure
• Visual indications:
  • Standard Conditions
  • Alarm Conditions
  • Color coded for criticalness
• Remote Alarms (SPDT-8A-250V.AC)
  • Power available
  • Phase reversal
  • Motor run
  • Common pump room alarm
  • Common Motor trouble

• Built to NFPA 20 (latest edition)
• Underwriters Laboratory (UL)
  • UL218 – Fire pump controllers
  • UL 1008 – Automatic power transfer switches for fire pump controllers
• New York City – Accepted for use in the City of New York by the Department of Buildings

ViZitouch V2 Operator Interface

• 7” color touch screen (HMI technology)
• Embedded microcomputer with software PLC logic
• Expandable storage
• Multi-language
• Upgradable software

• Enclosure Protection Rating
  • Standard: NEMA 2 Assembly
  • Optional:
    • NEMA 12
    • NEMA 3
    • NEMA 3R
    • NEMA 4
    • NEMA 4X-304 sst painted
    • NEMA 4X-304 sst brushed finish
    • NEMA 4X-316 sst painted
    • NEMA 4X-316 sst brushed finish
  • Accessories
    Keylock handle
• Paint Specifications
  • Red RAL3002
  • Powder coating
  • Glossy textured finish