×

GPx Series – Full Service Electric Additive (Foam) Pump Controllers

GPx Series – Full Service Electric Additive (Foam) Pump Controllers

Downloadables Manual
Brochure

Additive (Foam) Pump Controllers are typically designed for use in buildings where flammable or combustible liquids are present such as aircraft hangers, petro-chemical and hazardous waste facilities.

  • Model GPA – Full Voltage Across the Line Start
  •  Model GPY – Reduced Voltage Wye-Delta Open Start
    Other starting methods with or without transfer switch also available.

Choose one of the following configurations:

  • A8 – Additive (Foam) pump controller / non pressure actuated without pressure transducer and run test solenoid valve
  • A8A – Additive (Foam) pump controller with pressure transducer and run test solenoid valve

Add any of the following options if required:

  • D40 – Dump valve circuitry, 24VDC Max2A
  • Cx79 – Low foam additive level complete with visual indication and alarm contact (DPDT)
  • Cx081- Provision for proof pressure switch for low additive pressure complete with visual indication and alarm contact. (Proof pressure switch provided by others.)
Certificate Certificate Certificate Certificate Certificate

Additive (Foam) Pump Controllers are typically designed for use in buildings where flammable or combustible liquids are present such as aircraft hangers, petro-chemical and hazardous waste facilities.

  • Model GPA – Full Voltage Across the Line Start
  •  Model GPY – Reduced Voltage Wye-Delta Open Start
    Other starting methods with or without transfer switch also available.

Choose one of the following configurations:

  • A8 – Additive (Foam) pump controller / non pressure actuated without pressure transducer and run test solenoid valve
  • A8A – Additive (Foam) pump controller with pressure transducer and run test solenoid valve

Add any of the following options if required:

  • D40 – Dump valve circuitry, 24VDC Max2A
  • Cx79 – Low foam additive level complete with visual indication and alarm contact (DPDT)
  • Cx081- Provision for proof pressure switch for low additive pressure complete with visual indication and alarm contact. (Proof pressure switch provided by others.)
  • Electric Fire Pump Controllers Designed for use with electric motor driven fire pumps.
  • Available in a wide variety of full and reduced voltage starting methods.
  • Manufactured in accordance with the NFPA 20 standard, UL listed and FM Approved.
  • ViZiTouch V2 7 inch Color Touch Screen Operator Interface (HMI technology)
  • Models range from 208 to 600 volt, 5 to 500 horsepower, 50 / 60 Hz
  • Surge suppression
  • Disconnecting means
    • Single operator for both isolating switch and circuit breaker
    • Door interlocked in the ON position
  • Suitable as service entrance equipment
  • Emergency start handle
  • Locked rotor protector
  • Readings
    • Voltage and amperage display
    • Cut-in, cut-out and continuous system pressure
  • Visual indications:
    • Standard Conditions
    • Alarm Conditions
    • Color coded for criticalness
  • Remote Alarms (SPDT-8A-250V.AC)
    • Power available
    • Phase reversal
    • Motor run
    • Common pump room alarm (field re-assignable)
    • Common Motor trouble (field re-assignable)
    • Free (field programmable)
  • Built to NFPA 20 (latest edition)
  • Underwriters Laboratory (UL)
    • UL218 – Fire pump controllers
    • UL 1008 – Automatic power transfer switches for fire pump controllers
    • CSA C22.2 No. 14 Industrial Control Equipment
  • FM Global – Class 1321/1323
  • New York City – Accepted for use in the City of New York by the Department of Buildings
  • Seismic Certification:
    • Components are tested in accordance with ICC-ES AC156, IBC 2015 & CBC 2013.
    • CBC compliance is not applicable to OSHPD 1 & 4 buildings
  • Optional: CE Mark – Various EN, IEC & CEE directives and standards

ViZiTouch V2 Operator Interface

  • 7” color touch screen (HMI technology)
  • Embedded microcomputer with software PLC logic
  • Multi-language
  • Upgradable software
  • Enclosure Protection Rating
    • Standard: NEMA 2 Assembly
    • Optional:
      • NEMA 12
      • NEMA 3
      • NEMA 3R
      • NEMA 4
      • NEMA 4X-304 sst painted
      • NEMA 4X-304 sst brushed finish
      • NEMA 4X-316 sst painted
      • NEMA 4X-316 sst brushed finish
      • IP54
      • IP55
      • IP65
      • IP66
  • Accessories
    • Bottom entry gland plate
    • Lifting Lugs
    • Keylock handle
  • Paint Specifications
    • Red RAL3002
    • Powder coating
    • Glossy textured finish
certificate certificate certificate certificate certificate
Available Models
Click here for Specifications, Submittal Packages, etc.