The Tornatech Model OPD electric fire pump disconnecting device provides a UL listed means of disconnecting and consequently isolating the fire pump controller from incoming power. It also assures complete overcurrent protection coordination upstream of the fire pump controller. The selection of the overcurrent protective device is based on the voltage and horsepower of the electric fire pump motor and the requirements of NFPA70 (NEC) 695.4(B)(2)(a)(2), NFPA20 9.2.3.4.1 and as a recommended and acceptable alternative for CEC 32-206 (4) and (5).

• UL Listed means of disconnecting the fire pump controller from incoming power
• Completely removes the risk of arc flash in the fire pump controller
• Complete overcurrent protection coordination upstream of the fire pump controller
• Acceptable for installation in the U.S.A
• UL Listed for fire pump service as per
  • Normal Power circuit
    • NFPA70 (NEC): 695.4(B)(2)(a)(2)
    • NFPA20 9.2.3.4.1
  • Alternate Power circuit
    NFPA70 (NEC): 695.3(F)(2)
    Acceptable for installation in Canada as per
    • Normal power circuit: CEC 32.206(5)
    • Alternate power circuit: recommended and acceptable alternative to CEC 32.206(4)
• Suitable as service equipment
• NEMA 2 enclosure
• Flange mounted disconnect handle lockable in the ON (closed) position as per NFPA70 (NEC) 695.4(B)(3)(a)(2)
• Disconnect markings as per NFPA70 (NEC) 695.4(B)(3)(c)